filename: tfs 622a.doc version 1.3 19.01.2005 vi telefilter filter specification tfs 622a 1/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or app lication. no rights under any patent accompany the sale of any such product(s) or infor mation. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedance: * input: 114 ? || 0 pf output: 114 ? || 0 pf characteristics remark: the reference level for the relative attenuation a rel of the tfs 622a is the minimum attenuation in t he pass band. the maximum attenuation in the pass band is defined as the insertion loss a e . the nominal frequency f n is fixed at 622,08 mhz without any tolerance or limit. the values of relative attenuation a rel are guaranteed for the whole operating temperature range. the fr equency shift of the filter in the operating temperature range is included in the production tolerance scheme. d a t a typ. value tolerance / limit insertion loss a e 2,6 db 4,5 db (reference level) - - nominal frequency f n - 622,08 mhz centre frequency f c 622,08 mhz - passband pb 3 db 22 mhz min. 14 mhz relative attenuation a rel f n - 7,0 mhz ... f n + 7,0 mhz 0.8 db max. 3 db f n 155,52 mhz 65 db min. 50 db operating temperature range otr - - 30 c ... + 80 c storage temperature range - - 40 c ... + 85 c temperature coefficient of frequency tc f ** -72 ppm/k - input power level - max. 10 dbm *) the terminating impedances depend on parasitics and q-values of ma tching elements and the board used, and are to be understood as reference values only. should there be additional questions do not hesita te to ask for an application not e or contact our design team. **) ? f(hz) = tc f (ppm/k) x (t-t 0 ) x f to (mhz). generated: checked / approved:
filename: tfs 622a.doc version 1.3 19.01.2005 vi telefilter filter specification tfs 622a 2/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or app lication. no rights under any patent accompany the sale of any such product(s) or infor mation. filter characteristic construction and pin connection (all dimensions in mm) 50 ? test circuit 1 5 2, 3, 4, 6, 7, 8 622a t04 1 input 2 ground 3 ground 4 ground 5 output 6 ground 7 ground 8 ground date code: year + week t 2005 u 2006 v 2007 ... 615 620 625 630 635 -5 -4.5 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 frequency in mhz magnitude in db 400 500 600 700 800 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 frequency in mhz magnitude in db
filename: tfs 622a.doc version 1.3 19.01.2005 vi telefilter filter specification tfs 622a 3/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or app lication. no rights under any patent accompany the sale of any such product(s) or infor mation. stability characteristics after the following tests the filter shall meet the whole specification: 1. shock: 500g, 18 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respectively , 1 octave per min, 10 cycles per plan, 3 plans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 10 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: twice max.; for temperature conditions refer to the attached "a ir reflow temperature conditions" on page 4; packing tape & reel: iec 286 ? 3, with exeption of value for n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters peer reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at s tart including leader: min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 12,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 5,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 8,00 0,1 d1(min) : 1,50 a o : 4,30 0,1 bo : 4,30 0,1 ct : 9,5 0,1 reel (all dimensions in mm) a : 330 w1 : 12,4 +2/-0 w2(max) : 18,4 n(min) : 50 c : 13,0 +0,5/-0,2
filename: tfs 622a.doc version 1.3 19.01.2005 vi telefilter filter specification tfs 622a 4/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or app lication. no rights under any patent accompany the sale of any such product(s) or infor mation. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak tem perature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: tfs 622a.doc version 1.3 19.01.2005 vi telefilter filter specification tfs 622a 5/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or app lication. no rights under any patent accompany the sale of any such product(s) or infor mation. history version reason of changes name date 1.0 - generation of development specification acco rding to customer specification. dr. sabah 17.06.2003 1.1 - filter specification, add oft typical values dr. sabah 23.09.2003 1.2 - updating tk; do some formatting martens 12.10.2004 1.3 - added filter characteristics martens 19.01.2005
|
